Crocodile Epoxy Bonding Agent

Application Instruction

Surface Preparation

1. Clean the surface to be free of all dirt, dust, paint, and oil stains.
2. The concrete surface must be dense and strong. Sprinkle water on the concrete surface to moisten the surface first every time. But there must be no standing water areas where mold or algae occur. Should be cleaned with Crocodile M-Kil and left to dry for at least 4 hours.

Application Method

1. Open the cans of both parts A and B and stir before mixing the two parts together.
2. Pour part B into all of part A. Mix well using a low-speed mixer for about 2-3 minutes (rotation speed approximately 600 rpm) mix until you can see the color of Crocodile Epoxy Bonding is a gray color.
3. Apply Crocodile Epoxy Bonding Agent or apply it to the desired surface area. Should be completed within 2-3 hours.
4. Bring new concrete or the surface you want to pour/stick when Crocodile Epoxy Bonding Agent is not yet dry.

Coverage: 4-5 sq.m./1 set (2 kg) or depending on the porous surface

Caution

• Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• Apply with good ventilation. Do not inhale product.
• Keep out of reach of children.
• Do not eat.

Storage

• It should be kept in a dry place and the temperature is not too high to avoid product degradation.
• Use within 12-18 months from the date of manufacturing.