Crocodile Epoxy AnchorFix

Application

Proportion of Mixing

Mixing Part A : Part B = 2 : 1

Cartridge Use

1. Unscrew the cap of the cartridge
2. Screw the mixing nozzle onto the cartridge
3. Insert the cartridge into the gun
4. Remove the mixture until the two components have a homogeneous light grey color in the nozzle (Avoid using the first 10 ml)

Application method

1. Choose a drill of suitable dimensions depending on the rod to be anchored
2. Remove the water and dirt (dust and loose material) with a circular brush and a blower or with air pressure
3. The items to be fastened must be clean
4. In the case of a solid base material, inject the product from the base of the hole until 2/3 full
5. Insert the element to be fastened rotating, if necessary, keep the position with a suitable device
6. Unscrew the mixing nozzle and replace the cap

Caution

• Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• Apply with good ventilation. Do not inhale product.
• Keep out of reach of children
• Do not eat

Storage

• It should be kept in a dry place and the temperature is not too high to avoid product degradation.
• Use within 12-18 months from the date of manufacturing.